显示标签为“fiberglass cloth”的博文。显示所有博文
显示标签为“fiberglass cloth”的博文。显示所有博文

2016年8月31日星期三

How to Apply Fiberglass Cloth

Fiberglass cloth is a tightly woven fiberglass material typically used in marine and composite construction and repair applications. The cloth is lightweight and quick to apply. Once applied, it creates a strong, rigid waterproof layer as well as a smooth surface suitable for painting. No matter the size of the project, the application of the cloth is essentially the same. Applied with the aid of resin, fiberglass cloth creates a durable, lasting surface.

Sand the surface of the object to which you’re applying the fiberglass cloth. Use fine grain sandpaper to create a smooth surface that will take the cloth easily. Brush the surface with a large brush to remove the sanding residue and then go over the surface with a wax-impregnated tack rag to make certain it’s completely clean.
Use a rotary cutter to cut fiberglass cloth to fit the object that you’re covering. Make the cut so that the cloth is slightly larger than needed to leave room for any necessary shifting of the cloth during placement. Cut the cloth on a cutting board, using the rotary cutter blade to smoothly cut the cloth without causing tears.
Mix a batch of resin in a bucket according to the manufacturer’s instructions. Use enough to cover the object, The resin serves as both an adhesive for the cloth and as a filler for the cloth pores to provide the watertight surface. Wait about three minutes after mixing for the resin to catalyze.
Brush a coat of resin onto the object to be covered. Apply a thin layer of the resin along the entire surface of the object. Wait 30 minutes for the resin to cure.
Place the fiberglass cloth onto the object, taking care not to allow bunching or wrinkling to occur. Place the cloth so that it overlaps the sides slightly, about ½ inch.
Pour the resin over the cloth, slowly covering the surface of the cloth. Spread the resin over the cloth in a thin layer, working from the center of the cloth to the edges. The resin will seep through the cloth and bond it directly to the object. Try to maintain an even layering of the resin over the cloth, but build up a slightly thicker resin layer along the edges to prevent the cloth from peeling away.
Wipe away any excess resin on the cloth with a squeegee. Allow the resin 30 minutes curing time before continuing.
Use the rotary cutter to trim away the excess cloth from the edges of the object. Sand the ends of the cloth until even with the surface of your object.
Apply a third resin coating over the cloth using a brush to spread the resin in place. The third coat fills any pores between the fibers and only requires a very thin layer for effectiveness. Wait 30 minutes more for curing.
Brush a fourth layer over the cloth as a finish layer to build up enough of a resin coating for sanding purposes. Allow this final coat to cure for 24 hours.
Sand the resin covered cloth smooth, removing any imperfections left by the resin application. Wipe the fiberglass cloth down with tack cloth to remove the sanding residue.

2016年8月14日星期日

Fiberglass Cloth MSDS

MATERIAL SAFETY DATA SHEET

Product Name: FIBERGLASS CLOTH
Chemical Name: Fibrous glass


HAZARDOUS INGREDIENTS:

FIBROUS GLASS:

CAS # 65997-17-3
99.94%
FIBROUS GLASS DUST:

% not known *
* Amount will be dependent upon method of handling.

Exposure Limits:

ACGH TLV (Source): 5mg/m3, OSHA PEL (Source): 5mg/m3
PHYSICAL DATA:



Appearance & Odour:
Solid, White no odor

Vapour Pressure:
2.00 hPa


Vapour Density:
N/A


Solubility in Water:
Negligible


Specific Gravity:
Approximately 2.5

Evaporation Rate:
N/A


Softening Point:
Approximately 835ºC

Density:
2.560 g/cm3 @ 77ºF / 25ºC

pH:
N/A


FIRE & EXPLOSION DATA:


Flashpoint & Method:

N/A

Flammable Limits:

N/A

Extinguishing Methods:

Water, foam, carbon dioxide, dry chemical
Special Equipment & Procedures:
Self contained breathing apparatus and complete protective clothing.
REACTIVITY DATA:



Conditions Contributing to Instability:
Stable

Incompatible Substances:

None

Hazardous Decomposition Products:
Carbon dioxide, carbon monoxide, hydrocarbons, water.
Hazardous Polymerization:
Will not occur.




HEALTH HAZARDS DATA:

NOTE: Health studies have shown that exposure to chemicals pose potential risks which may vary from person to person. Exposure to liquids, vapours, mists or fumes should be minimized.

PRINCIPAL HEALTH HAZARDS:

Skin Contact: Minor irritation
Eye Contact: Minor irritation
Ingestion: Minor irritation
Inhalation: Minor irritation

FIRST AID PROCEDURES:

Skin: Wash with soap & water. If irritation persists see physician
Eyes: Flush with water for 15 minutes. If irritation persists see physician.
Ingestion: Give 2 glasses of water. If irritation persists see physician.
Inhalation: Remove to fresh air.

PREVENTIVE MEASURES:

Skin: Always apply appropriate barrier cream to exposed skin. Wear impervious gloves (butyl rubber), coveralls and safety footwear.

Eyes: Chemical proof goggles or full face respirator if vapours cause eye irritation. 
Ingestion: Wash thoroughly before consuming food stuffs.
Inhalation: Use only in well ventilated areas or use NIOSH approved respiratory protection with organic vapour cartridges.


CONTROL MEASURES & PRECAUTIONS
Keep container tightly closed. Do not consume food, drink or tobacco in work area or material storage areas.

Use caution and personal cleanliness to avoid skin and eye contact. Avoid breathing vapours of heated materials. Use paper covering absorbent wipes and suitable disposable containers in work area.

SPILL, LEAK & DISPOSAL METHODS

Review fire and explosion hazards and safety precautions before proceeding with clean up. Restrict access to area. Contain spill to prevent dust from entering sewers or waterways. Place in suitable container for disposal.

DISPOSAL METHOD

Dispose only in a facility permitted to dispose of hazardous waste by Federal, Provincial and Municipal regulations.


SHIPPING INFORMATION

Shipping Name:

Hazard Class: Non Regulated

UN/PIN #:
Flashpoint:
WHMIS: D2B


The information contained herein is based on data that we believe to be accurate. No warranty either expressed or implied is made. This information is offered solely for your consideration interpretation and information. 

N/A = Not Available

2016年8月9日星期二

Difference in Fiberglass Cloth & Mat

Fiberglass is a composite material that includes extruded filaments of glass. The fiberglass used in the automotive industry and in boat building and hull repair is different from the fiberglass used for insulation. Rigid fiberglass can be held together with an epoxy resin. Fiberglass mat differs from fiberglass cloth in the way it is constructed and in its appearance.

History

  • The ancient Egyptians and Phoenicians experimented with creating and using fiberglass. In 1880, fiberglass cloth was developed that was both durable and flame retardant. During the 20th century, fiberglass was improved and used as reinforcement in plastic laminates. When polyester resin was created, it was combined with fiberglass to form a fiberglass composite. In 1953, the first vehicle with a body made completely out of fiberglass-reinforced plastic was created, the Chevrolet Corvette.

Uses

  • Fiberglass mat usually comes in large carpet-like rolls and is used for automotive and boat projects. It can be used to install speakers in a car while making a mold for them, or it can be used to repair the body of a marine vehicle. Fiberglass cloth has a smoother-looking finish, excellent for water-proofing wood or other surfaces when combined with resin. Fiberglass is also used in a variety of household fixtures, like shower stalls and bathtubs.

Mat

  • Fiberglass mats make up most of a fiberglass body or kit. The strands of fiberglass in a mat are disorganized and can intermesh easily with the fibers of other mats, so they bond together. During construction, fiberglass mats are layered until the desired strength or thickness is achieved. Fiberglass mat has a higher density than fiberglass cloth.

Cloth

  • Fiberglass cloth is a layer of woven strands. It is strong, with a uniform appearance, and is used where the look of a project is important. The woven fibers do not intermesh with the fibers of other layers of fiberglass cloth.

Caution


  • When working with fiberglass, use a mask designed to work with it. Always protect all exposed skin, and wear gloves. Because fiberglass is essentially tiny glass shards, if your skin comes in contact with it, it will cause irritation, itching and rashes. Also, the resin or hardener used to hold the mats and cloth together can be dangerous to inhale, especially in confined areas.

2016年7月24日星期日

9 Properties of Fiberglass Cloths

Fiberglass cloths or fabrics are made of fiberglass yarn by weaving in different processes. They are an ideal material for fireproofing, heat insulation and industrial insulation and base fabric of composite materials for the following properties.

1. CHEMICAL RESISTANCE
Like glass itself, fiberglass cloths will not rot, mildew or deteriorate. They highly resist most chemicals.
2. DIMENSIONAL STABILITY
Fiberglass cloths will not stretch or shrink. Nominal elongation break is 3-4%. The maximum elongation for “E” glass at break is 4.8% with a 100% elastic recovery when stressed close to its point of rupture.
3. HIGH TENSILE STRENGTH
Fiberglass yarn has a high strength-to-weight ratio. Fiberglass yarn is twice as strong as steel wire with the same diameter.
4. GOOD THERMAL PROPERTIES
Fiberglass cloths have a low coefficient of thermal expansion and relatively high thermal conductivity. Glass cloths will distribute heat more rapidly than organic fibers.
5. HIGH THERMAL ENDURANCE
Fiberglass cannot burn and is basically unaffected by curing temperatures used in industrial processing. Fiberglass will retain approximately 50 percent of its strength at 700°F (371°C) and as much as 25 percent at 900°F (482°C); with a softening point of 1555°F (846°C) and a melting point of 2075° F (1121 °C).
6. LOW MOISTURE ABSORPTION
Fiberglass yarn has extremely low moisture absorption, and don’t change physically or chemically when exposed to water.
7. ELECTRICAL INSULATION
High dielectrical strength and relatively low dielectrical constants make fiberglass cloths outstanding for electrical insulation purposes.
8. PRODUCT VERSATILITY
The wide range of filaments, fiberglass yarns, yarn sizes, weave types and finishes make fiberglass cloths available for a broad range of industrial end uses.
9. COST-EFFECTIVENESS
Fiberglass cloths offer cost advantages compared to other synthetic and natural fiber cloths.

2016年7月14日星期四

What is Fiberglass Fabric

Fiberglass fabric or cloth, with C and E Glass, is woven in various configurations from five basic weave patterns, called plain, leno, satin, twill and basket. Fiberglass cloth is a strong and durable woven textile used mainly for industrial applications. Its unique valuable properties makes it ideal for many industrial uses, such as for the interiors of circuit boards, conveyor belts and vehicles. Light-weight cloths also provide a smooth finish and are ideal for producing a waterproof layer over wood or other surfaces, such as is needed in boat repair and other marine applications.
Perhaps the most notable quality of fiberglass cloth itself is its high tolerance of extreme heat. It not only dissipates radiant heat with remarkable efficiency, but some types of cloth can withstand temperatures of up to 1648 degrees C for as long as a minute. Another notable attribute of fiberglass fabric is its high tensile strength. At a much lower weight and cost, it has a greater tensile strength than steel wire of similar diameter. Fiberglass fabric has excellent dimensional stability as well, meaning that fiberglass fabric stretches only very minimally under stress- usually about 3 percent or less. Like glass itself, fiberglass is highly resistant to most harsh industrial chemicals.
Meanwhile, fiberglass fabric can be combined with coatings on the surface to meet specific requirements for extensive applications such as thermal insulation, fire resistance, welding protection etc.
Oddly enough, despite its resilience and resistance to almost every possible type of industrial hazard, it is important that fiberglass cloth be rolled onto a tube for shipment, and not folded, regardless of how large or small the order may be. Folding it for shipment can damage the cloth where it is creased. If this one precaution is followed, the structural integrity of the fabric will be preserved to provide strength or protection in whatever context it is needed for.