显示标签为“fiberglass fabric”的博文。显示所有博文
显示标签为“fiberglass fabric”的博文。显示所有博文

2016年11月15日星期二

Fiberglass versus Polyester

Dimensional Stability:

Characteristics

Fiberglass dose not stretch, shrink or twist nor is it affected by extreme changes in temperature.

Polyester fabrics will stretch when exposed to solar heat.

Results

The stability of fiberglass fabrics allow for even roll up of the shade material eliminating traveling from side to side, without the use of unsightly battens.
The stretching of the polyester fabric causes waves and buckling of the fabric which necessitates the use of battens in shades approximately 12 feet in height and above.



Yarn Count And Thickness:

Characteristics

Fiberglass fabrics use a much finer yarn than their polyester counterpart, resulting in more yarns per square inch.
Polyester fabrics are made of wider diameter yarns, resulting in fewer yarns per square inch.

Results

The greater the yarn count for a given openness factor, the better the outward view.
Using the thicker polyester yarn causes the eye to focus on the yarn itself, thus diminishing the outside view.



PVC Coating:

Characteristics

The strength and stability of the fiberglass fabric results in the need for a thinner coating of PVC.
The less stable polyester fabrics require a thicker coating of PVC.

Results

The thinner coating results in a more uniformly stable and strong fabric, as the fabric’s strength comes from its fiberglass yarn.
The thicker coating results in more instability and reduced strength of the polyester fabric.

2016年8月14日星期日

Fiberglass Cloth MSDS

MATERIAL SAFETY DATA SHEET

Product Name: FIBERGLASS CLOTH
Chemical Name: Fibrous glass


HAZARDOUS INGREDIENTS:

FIBROUS GLASS:

CAS # 65997-17-3
99.94%
FIBROUS GLASS DUST:

% not known *
* Amount will be dependent upon method of handling.

Exposure Limits:

ACGH TLV (Source): 5mg/m3, OSHA PEL (Source): 5mg/m3
PHYSICAL DATA:



Appearance & Odour:
Solid, White no odor

Vapour Pressure:
2.00 hPa


Vapour Density:
N/A


Solubility in Water:
Negligible


Specific Gravity:
Approximately 2.5

Evaporation Rate:
N/A


Softening Point:
Approximately 835ºC

Density:
2.560 g/cm3 @ 77ºF / 25ºC

pH:
N/A


FIRE & EXPLOSION DATA:


Flashpoint & Method:

N/A

Flammable Limits:

N/A

Extinguishing Methods:

Water, foam, carbon dioxide, dry chemical
Special Equipment & Procedures:
Self contained breathing apparatus and complete protective clothing.
REACTIVITY DATA:



Conditions Contributing to Instability:
Stable

Incompatible Substances:

None

Hazardous Decomposition Products:
Carbon dioxide, carbon monoxide, hydrocarbons, water.
Hazardous Polymerization:
Will not occur.




HEALTH HAZARDS DATA:

NOTE: Health studies have shown that exposure to chemicals pose potential risks which may vary from person to person. Exposure to liquids, vapours, mists or fumes should be minimized.

PRINCIPAL HEALTH HAZARDS:

Skin Contact: Minor irritation
Eye Contact: Minor irritation
Ingestion: Minor irritation
Inhalation: Minor irritation

FIRST AID PROCEDURES:

Skin: Wash with soap & water. If irritation persists see physician
Eyes: Flush with water for 15 minutes. If irritation persists see physician.
Ingestion: Give 2 glasses of water. If irritation persists see physician.
Inhalation: Remove to fresh air.

PREVENTIVE MEASURES:

Skin: Always apply appropriate barrier cream to exposed skin. Wear impervious gloves (butyl rubber), coveralls and safety footwear.

Eyes: Chemical proof goggles or full face respirator if vapours cause eye irritation. 
Ingestion: Wash thoroughly before consuming food stuffs.
Inhalation: Use only in well ventilated areas or use NIOSH approved respiratory protection with organic vapour cartridges.


CONTROL MEASURES & PRECAUTIONS
Keep container tightly closed. Do not consume food, drink or tobacco in work area or material storage areas.

Use caution and personal cleanliness to avoid skin and eye contact. Avoid breathing vapours of heated materials. Use paper covering absorbent wipes and suitable disposable containers in work area.

SPILL, LEAK & DISPOSAL METHODS

Review fire and explosion hazards and safety precautions before proceeding with clean up. Restrict access to area. Contain spill to prevent dust from entering sewers or waterways. Place in suitable container for disposal.

DISPOSAL METHOD

Dispose only in a facility permitted to dispose of hazardous waste by Federal, Provincial and Municipal regulations.


SHIPPING INFORMATION

Shipping Name:

Hazard Class: Non Regulated

UN/PIN #:
Flashpoint:
WHMIS: D2B


The information contained herein is based on data that we believe to be accurate. No warranty either expressed or implied is made. This information is offered solely for your consideration interpretation and information. 

N/A = Not Available

2016年7月24日星期日

9 Properties of Fiberglass Cloths

Fiberglass cloths or fabrics are made of fiberglass yarn by weaving in different processes. They are an ideal material for fireproofing, heat insulation and industrial insulation and base fabric of composite materials for the following properties.

1. CHEMICAL RESISTANCE
Like glass itself, fiberglass cloths will not rot, mildew or deteriorate. They highly resist most chemicals.
2. DIMENSIONAL STABILITY
Fiberglass cloths will not stretch or shrink. Nominal elongation break is 3-4%. The maximum elongation for “E” glass at break is 4.8% with a 100% elastic recovery when stressed close to its point of rupture.
3. HIGH TENSILE STRENGTH
Fiberglass yarn has a high strength-to-weight ratio. Fiberglass yarn is twice as strong as steel wire with the same diameter.
4. GOOD THERMAL PROPERTIES
Fiberglass cloths have a low coefficient of thermal expansion and relatively high thermal conductivity. Glass cloths will distribute heat more rapidly than organic fibers.
5. HIGH THERMAL ENDURANCE
Fiberglass cannot burn and is basically unaffected by curing temperatures used in industrial processing. Fiberglass will retain approximately 50 percent of its strength at 700°F (371°C) and as much as 25 percent at 900°F (482°C); with a softening point of 1555°F (846°C) and a melting point of 2075° F (1121 °C).
6. LOW MOISTURE ABSORPTION
Fiberglass yarn has extremely low moisture absorption, and don’t change physically or chemically when exposed to water.
7. ELECTRICAL INSULATION
High dielectrical strength and relatively low dielectrical constants make fiberglass cloths outstanding for electrical insulation purposes.
8. PRODUCT VERSATILITY
The wide range of filaments, fiberglass yarns, yarn sizes, weave types and finishes make fiberglass cloths available for a broad range of industrial end uses.
9. COST-EFFECTIVENESS
Fiberglass cloths offer cost advantages compared to other synthetic and natural fiber cloths.

2016年7月14日星期四

What is Fiberglass Fabric

Fiberglass fabric or cloth, with C and E Glass, is woven in various configurations from five basic weave patterns, called plain, leno, satin, twill and basket. Fiberglass cloth is a strong and durable woven textile used mainly for industrial applications. Its unique valuable properties makes it ideal for many industrial uses, such as for the interiors of circuit boards, conveyor belts and vehicles. Light-weight cloths also provide a smooth finish and are ideal for producing a waterproof layer over wood or other surfaces, such as is needed in boat repair and other marine applications.
Perhaps the most notable quality of fiberglass cloth itself is its high tolerance of extreme heat. It not only dissipates radiant heat with remarkable efficiency, but some types of cloth can withstand temperatures of up to 1648 degrees C for as long as a minute. Another notable attribute of fiberglass fabric is its high tensile strength. At a much lower weight and cost, it has a greater tensile strength than steel wire of similar diameter. Fiberglass fabric has excellent dimensional stability as well, meaning that fiberglass fabric stretches only very minimally under stress- usually about 3 percent or less. Like glass itself, fiberglass is highly resistant to most harsh industrial chemicals.
Meanwhile, fiberglass fabric can be combined with coatings on the surface to meet specific requirements for extensive applications such as thermal insulation, fire resistance, welding protection etc.
Oddly enough, despite its resilience and resistance to almost every possible type of industrial hazard, it is important that fiberglass cloth be rolled onto a tube for shipment, and not folded, regardless of how large or small the order may be. Folding it for shipment can damage the cloth where it is creased. If this one precaution is followed, the structural integrity of the fabric will be preserved to provide strength or protection in whatever context it is needed for.